Those steamy summer days between July and August are the days when your customers need their sunglasses the most. They are also the days when perspiration can make it nearly impossible to keep a pair of sunglasses on your face without them slipping. No worries though, there are ways to get around the slipping.
You might be a retailer that offers free adjustments. Your profit margin is high enough to offer the service because you buy bulk sunglasses from us. If so, this post is not for you. What you will read below is intended for retailers who do not offer free adjustments yet still find themselves giving customers advice about slippage.
The Hairdryer Method
Sunglasses that slip as a result of perspiration are generally not tight enough around the back of the ears. The easiest way to solve this problem is to tighten them up by actually bending the plastic frames. This can be done with a hair dryer, a towel, and a little TLC.
Your customer should put the hair dryer on its highest setting. Hot air will then be directed toward the back of the ear piece until the plastic is hot enough to bend. The idea is to bend the ear piece upward, using the towel to protect against being burned. Customers who decide to use this method should make adjustments in small increments. Going to big could mean having to make multiple adjustments back and forth which, ultimately, could end up breaking the plastic.
The Elastic Band
Customers not thrilled about the idea of heating up their sunglasses could elect to purchase an elastic band. The bands are very popular for kids who have trouble keeping their regular prescription eyeglasses on due to their rambunctiousness. Fortunately, the elastic bands work equally well for sunglasses.
If you buy bulk kids sunglasses from us, you might want to invest in bulk elastic bands as well. They go well together – just like peanut butter and jelly or baseball and apple pie.
Adhesive Foam Pads
Another good idea that comes from the world of prescription eyeglasses are those adhesive foam pads you buy at the pharmacy. The pads were originally intended for eyeglasses with metal frames and plastic bridge pads for the nose. You simply affix a foam pad to each bridge pad and away you go.
The pads work equally well on plastic sunglasses. You can place one on each side of the bridge as well as on each ear piece – just in front of, or behind, the ear. The only downside to foam pads is that perspiration will eventually get underneath the adhesive and cause them to fall off. New pads may have to be applied a couple of times during the summer season.
The Abrasion Method
Last but not least is the abrasion method. This is typically a measure of last resort, especially if your customers are buying fashion sunglasses. Those interested in trying it need only possess a file or emery board. Also note that this method does not work well for sunglasses with metal frames. It is really intended for plastic.
Using the file or emery board, the customer simply scuffs the plastic surface on either side of the bridge and where the earpieces contact the side of the head. Scuffing the plastic does essentially the same thing as affixing adhesive foam pads. The advantage of this method is that perspiration is never a problem.
If you buy bulk sunglasses from Olympic Eyewear, we thank you for your loyalty. Hopefully, these tips for preventing slippage during the hot summer months will be useful for your customers.